Confirm the settings by clicking on "OK" and then pressing "Enter". Go from the "Hostname/DNS" tab and enter the IP address 8.8.8.8 in the "Name Server 1" field and the IP address 8.8.4.4 in the "Name Server 2" field.Confirm the changes by clicking on "Next". In "Address" make sure that "Statically assigned IP Address" is selected and then indicate the details of the IP Address and the Subnet Mask in the fields, leaving the "Hostname" field empty.A list of the existing network interfaces will appear: move by using the arrow keys and the and select the network adapter that you previously associated and after selecting press "Enter".In the graphical interface, move by using the arrow keys and the on Network Settings in Network Devices and press "Enter".To configure the network interface permanently, proceed as follows:
Run route from the command line to check the gateway settings for the IP.ifconfig eth2 to check the new setting on the eth2 network adapter). Run ifconfig from the command line to check that the network adapter has been configured correctly (e.g.by running route add default gw 95.110.159.1 the "default" gateway will be setup with the "95.110.159.1" IP). Run "route" from the command line like so: route add default gw whereby: is the IP address relevant to the gateway (e.g.Run ifconfig from the command line like so: ifconfig netmask whereby: is the network adapter that you wish to configure (eth0 eth1 eth2), is the Public IP address that you wish to associate, is the relevant sub netmask.To configure the network adapter temporarily, for diagnostic purposes or to verify or test how it works, proceed as follows: On Linux it is possible to configure the network adapter both temporarily (up to the next reboot), and permanently. Once the Public IP summary page opens, click on "Details" in the line of the IP you wish to know the configuration parameters for.Īfter getting the details, access the Cloud Server from the Recovery Console.Select the "Manage" tab in the control panel and click on "Public IPs" in the menu on the left.These details can be retrieved in the Public IP details window from the control panel: To activate the association created between Public IP and Cloud Server you need to configure the network adapter with the parameters provided when the Public IP was created.
0 kommentar(er)
